printer_technology = FFF
bed_shape = 0x0,150x0,150x150,0x150
max_print_height = 150
nozzle_diameter = 0.4
filament_diameter = 1.75
gcode_flavor = reprap
use_relative_e_distances = 1

first_layer_height = 0.2
top_solid_layers = 4
bottom_solid_layers = 4
support_material_style = grid
support_material_pattern = rectilinear-grid
support_material_spacing = 1.8
support_material_with_sheath = 1
support_material_threshold = 45
support_material_buildplate_only = 1
support_material_contact_distance = 0.2
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_speed = 20
brim_separation = 0

temperature = 240
first_layer_temperature = 240
bed_temperature = 100
first_layer_bed_temperature = 100
disable_fan_first_layers = 5
min_fan_speed = 0
max_fan_speed = 0
bridge_fan_speed = 0

first_layer_speed = 4
first_layer_extrusion_width = 200%
perimeter_speed = 30
external_perimeter_speed = 20
small_perimeter_speed = 20
infill_speed = 35
solid_infill_speed = 30
top_solid_infill_speed = 20
bridge_speed = 20
travel_speed = 80

retract_length = 1.5
retract_speed = 30
deretract_speed = 25
retract_lift = 0.4

start_gcode = M140 S[first_layer_bed_temperature]\nM104 S0 ; avoid simultaneous full-power bed/nozzle heating\nG90\nM83\nG28\nM320 ; activate saved Repetier auto-level matrix\nM190 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature]\nM109 S[first_layer_temperature]\nG1 Z5 F1200
end_gcode = G1 E-1 F900\nG91\nG1 Z5 F600\nG90\nG1 X5 Y140 F3000\nM400\nM104 S0\nM140 S0\nM84
autoemit_temperature_commands = 1

support_material = 0
support_material_auto = 0
thumbnails = 
brim_type = no_brim
brim_width = 0
layer_height = 0.2
raft_layers = 3
raft_contact_distance = 0.2
raft_expansion = 1.5
skirts = 0
skirt_distance = 0
perimeters = 4
fill_density = 40%
fill_pattern = gyroid